


Air-Cooled Condensing Units
KLPH Series Bitzer Air-Cooled Piston Condensing Unit – Medium/High Temperature
Air-cooled condensing unit on the original German BITZER semi-hermetic piston compressor, for medium/high-temperature rooms from 12.5°C to -25°C. R22/R404A, 380V/3P/50Hz, models 2KES-05 to 6FE-50. For fresh-keeping, chilled storage, food production and air conditioning.
Specifications
- Compressor
- BITZER semi-hermetic piston compressor, original German
- Series
- KLPH, medium/high temperature, air-cooled
- Evaporating temperature
- 12.5°C to -25°C (54.5°F to -13°F)
- Refrigerant
- R22 / R404A (Y models: R404A)
- Power supply
- 380V / 3-phase / 50Hz
- Model range
- 2KES-05 to 6FE-50
- Cooling capacity, 2KES-05 at 0°C, R22
- 2,960 W (catalog sample data)
- Cooling capacity, 6FE-50 at 0°C, R22
- 124,600 W (catalog sample data)
- Condenser
- Air-cooled, full-size coil, fan-cooled
- Fan, 2KES-05
- FN12, Φ350 × 1, 2,670 m³/h, 135 W
- Dimensions, 2KES-05
- 830 × 760 × 600 mm (32.7 × 29.9 × 23.6 in)
- Standard configuration
- Liquid reservoir, oil separator, suction accumulator, filter, sight glass, solenoid valve, pressure controller, gauges
The KLPH series is COOLEST's air-cooled condensing unit built on the original German BITZER semi-hermetic piston compressor, for medium- and high-temperature rooms from 12.5°C down to -25°C. It runs on R22 or R404A at 380V/3P/50Hz, with models from 2KES-05 to 6FE-50. If your room holds fresh food or chilled goods above -25°C and you have outdoor air for the condenser, start here.
Who the KLPH fits, and who should look elsewhere
The KLPH is built for buyers who run rooms above freezing: fresh-keeping rooms, chilled storage, food production cooling and air-conditioning projects. Cold storage contractors buy it as the workhorse of a new room; refrigeration distributors stock it as the standard air-cooled answer for medium-temperature jobs. The deciding number is the evaporating temperature: 12.5°C down to -25°C. A fresh-food cold room at 0°C sits comfortably in the middle of that range — the smallest model, 2KES-05, delivers 2,960 W at 0°C evaporating temperature on R22 (catalog sample data), and the range runs up to the 6FE-50 at 124,600 W, so one series covers a small shop cold room and a large production store alike.
Two buyers should not start here. If the room must hold frozen goods below -25°C, the KLPL series covers -5°C to -40°C instead. And if the site has no outdoor air for a condenser — a sealed plant room, for example — the water-cooled SL series is the one to check. If you do not yet know your evaporating temperature, pin that down first: it is the single input that decides the model, and everything else follows from it.
What is inside, and how the numbers map to the job
At the centre is the original German BITZER semi-hermetic piston compressor, with accessories imported or from well-known domestic brands. The condenser is sized with a full coil — the catalog's own words are good heat dissipation, high efficiency and low energy consumption — and the unit is built for small vibration, low noise, a compact structure and high reliability. The design is deliberately simple: small volume, light weight, a small footprint and a reasonable layout that is easy to maintain.
Every KLPH leaves the factory with the same standard configuration: liquid reservoir, oil separator, suction accumulator, filter, sight glass, solenoid valve, pressure controller, high and low pressure gauges, discharge muffler, pipe interface valves, connection box and steel frame. The same model can run on R22 or R404A — Y models are the R404A versions — so the refrigerant decision does not force a different unit. Power is 380V/3P/50Hz across the whole series. Fan data is on the table: the 2KES-05 uses an FN12 fan, Φ350 × 1, moving 2,670 m³/h at 135 W, and its overall size is 830 × 760 × 600 mm. Treat the capacity figures as what they are: catalog sample data for reference. The exact specification of the unit you buy is fixed in the contract, not in the catalog.
How to order
Ordering a KLPH comes down to four inputs. First, the evaporating temperature — the temperature your room must hold. Second, the cooling load — or, if you do not have it calculated, the room size, what goes in it, and the target temperature. Third, the refrigerant: R22 or R404A. Fourth, the power supply on site. With those four, we match the model — from 2KES-05 up to 6FE-50 — and confirm the final specification in the contract.
To start, send your room temperature and cooling load through the inquiry form. Yiwu Ruluan Trading will come back with the matching KLPH model and a quotation. No prices, lead times or certifications are listed on this page because the catalog does not give them; they are confirmed case by case, in writing, before you order.
