COOLEST dual-fan air-cooled condensing unit
COOLEST large air-cooled condensing unit
Air-Cooled Condensing Units

KLPL Series Bitzer Air-Cooled Piston Condensing Unit – Medium/Low Temperature

Air-cooled condensing unit on the original German BITZER semi-hermetic piston compressor, for medium/low-temperature rooms from -5°C to -40°C. R22/R404A, 380V/3P/50Hz, models 2HES-1 to 6FE-44. For frozen storage, blast freezing and low-temperature cold rooms.

Specifications

Compressor
BITZER semi-hermetic piston compressor, original German
Series
KLPL, medium/low temperature, air-cooled
Evaporating temperature
-5°C to -40°C (23°F to -40°F)
Refrigerant
R22 / R404A (Y models: R404A)
Power supply
380V / 3-phase / 50Hz
Model range
2HES-1 to 6FE-44
Cooling capacity, 2HES-1 at -25°C, R22
1,650 W (catalog sample data)
Cooling capacity, 6FE-44 at -25°C, R22
46,350 W (catalog sample data)
Condenser
Air-cooled, full-size coil, fan-cooled
Fan, 2HES-1
FN12, Φ350 × 1, 2,670 m³/h, 135 W
Standard configuration
Liquid reservoir, oil separator, suction accumulator, filter, sight glass, solenoid valve, pressure controller, gauges
Application
Frozen storage, blast freezing, low-temperature cold rooms, food freezing
The KLPL series is COOLEST's air-cooled condensing unit built on the original German BITZER semi-hermetic piston compressor, for medium- and low-temperature rooms from -5°C down to -40°C. It runs on R22 or R404A at 380V/3P/50Hz, with models from 2HES-1 to 6FE-44. If your room must hold frozen goods — frozen food, ice cream, deep-frozen storage — and you have outdoor air for the condenser, start here.
Who the KLPL fits, and who should look elsewhere The KLPL is the frozen side of the same piston platform as the KLPH. Cold storage contractors buy it for frozen food stores, blast-freezing rooms and low-temperature cold rooms; distributors stock it as the standard air-cooled answer for anything that must stay below -5°C. The deciding number is the evaporating temperature: -5°C down to -40°C. A frozen-food room at -25°C sits in the middle of that range — the smallest model, 2HES-1, delivers 1,650 W at -25°C evaporating temperature on R22 (catalog sample data), and the range runs up to the 6FE-44 at 46,350 W at the same temperature, so one series covers a small frozen store and a large freezing plant alike. Two buyers should not start here. If the room holds fresh or chilled goods above -5°C, the KLPH series covers 12.5°C to -25°C and is the right page. And if the room must go below -40°C — blast freezing toward -50°C — the KLDPL two-stage series covers -20°C to -50°C instead. The boundary matters because a single-stage piston unit ordered for a temperature outside its range will not hold the room, and the fix is a different unit, not a different setting. If you do not yet know your evaporating temperature, pin that down first: it is the single input that decides the model, and everything else follows from it.
What is inside, and how the numbers map to the job At the centre is the original German BITZER semi-hermetic piston compressor, with accessories imported or from well-known domestic brands — the same platform as the KLPH, built for the colder end of the range. The condenser is sized with a full coil: good heat dissipation, high efficiency and low energy consumption. The unit is built for small vibration, low noise, a compact structure and high reliability, with a small footprint and a layout that is easy to maintain. The fan grows with the model: the 2HES-1 uses an FN12 fan, Φ350 × 1, moving 2,670 m³/h at 135 W, while the largest model, the 6FE-44, runs a split FNV320 fan set, Φ600 × 3, moving 25,800 m³/h. Every KLPL leaves the factory with the same standard configuration as the rest of the piston series: liquid reservoir, oil separator, suction accumulator, filter, sight glass, solenoid valve, pressure controller, high and low pressure gauges, discharge muffler, pipe interface valves, connection box and steel frame. The same model can run on R22 or R404A — Y models are the R404A versions — so the refrigerant decision does not force a different unit. Power is 380V/3P/50Hz across the whole series. Treat the capacity figures as what they are: catalog sample data for reference. The exact specification of the unit you buy is fixed in the contract, not in the catalog.
How to order Ordering a KLPL comes down to four inputs. First, the evaporating temperature — the temperature your frozen room must hold. Second, the cooling load at that temperature — or, if you do not have it calculated, the room size, what goes in it, and the target temperature. Third, the refrigerant: R22 or R404A. Fourth, the power supply on site. With those four, we match the model — from 2HES-1 up to 6FE-44 — and confirm the final specification in the contract. To start, send your room temperature and cooling load through the inquiry form. Yiwu Ruluan Trading will come back with the matching KLPL model and a quotation. No prices, lead times or certifications are listed on this page because the catalog does not give them; they are confirmed case by case, in writing, before you order.